The use of flexible cable fire precautions?
Precautions for the use of flexible fireproof cables? We have also made a brief introduction to this issue before, but found that there are still many customers who do not understand. Today, I also take this opportunity to explain to you. Hope can bring good help for the relevant people.
There are also many things to pay attention to when using flexible cable fireproof products. For example, its laying cannot be twisted, that is, the cable cannot be unwound from one end of the cable reel or cable reel. Instead, the cable reel or cable reel is rotated to unwind the cable. If necessary, the cables can be deployed or suspended. The cable used in this case can only be obtained directly from the cable reel. When there is no problem in these places, you can pay attention to the bending radius of the wire. Or loosely arranged side by side in the drag chain, separated as far as possible, separated by spacers or inserted into the compartments in the gap of the bracket. The gap between the flexible fire protection of the cables in the drag chain should be at least 10% of the diameter of the cables. The cables in the drag chain shall not touch or stick to each other. In addition, it should be noted that both ends of the rope need to be fixed, or at least the moving end of the drag chain. Generally, the distance from the flexible fireproof moving point of the cable to the end of the drag chain should be 20-30 times the diameter of the cable.
It is also necessary to ensure that the flexible fire protection of the cable is completely moved within the bending radius, that is, it cannot be forcibly moved. In this way, the flexible cables can be moved relative to each other or relative to the guiding device. After running for a period of time, check the position of the cable. This check should be done after the push-pull exercise. Flexible fireproof cable with flexible, bending, oil resistance, wear resistance, corrosion resistance and other special properties. Mainly used in robots, servo systems, traction systems and other special environments, long life. General cable can only be used for home appliances, power tools, power wiring. Also need to pay attention to the use of the cable bending radius is small. Filters shall be arranged loosely side by side and as far apart as possible. The distance between cables in the filter chain shall be at least 10% of the cable diameter of the separation hole separated by the partition or the gap bracket penetrating the flexible fire chain of the cable. Can't touch each other or get stuck together.
The content of the above article is about the matters needing attention in the use of flexible cable fire prevention for all friends, and a better flexible cable fire prevention manufacturer is also shared in the content. If you have this demand, you can check it out, hoping to bring you help. As the main product of our factory, thanks to the strong support of new and old customers, while ensuring the reliability of product quality, we also benefit our customers. If you have any technical problems related to the product, you can come here at any time to consult.